1
2
3
0
Use the heat gun and a scraper to
Lift the varnish with in difficult detail by
Use a sander and fine sandpaper to
remove the heavy layers of varnish.
going over with the heat gun until the
sand down the flat surfaces. Take care
Work in long strokes so as not to burn
varnish bubble slightly
to let the machine do the work, and
the wood.
dust the sandpaper often
4
5
6
Use fine sandpaper and sand the detail
Brush off the sideboard to remove as
Use a damp cloth to give the sideboard
by hand. The sander will remove too
much dust as possible
and details a good clean and let it dry
much of the detail.
properly
7
8
9
Stir the paint well. This furniture paint
Remove all the part from the sideboard
Let
pieces
thoroughly
dry
for
does not need an undercoat. We used
and give the wood a coat of paint, wait
approximately 18 hours before applying
Crazy Daisy from Plascon.
30 minutes and apply a second coat
the final coat of paint
10
11
12
Apply the final coat of paint and
Use some paper towel and apply a
We removed the back panel in order to
touchups where needed and let dry for
generous layer of antique wax. Wait
house a little minibar fridge for cold
a further 18 hours before re-assembling
until hazy and then buff with some
beverages.
the parts
clean paper towel
26

---